Clear acrylic foam double sided mounting tape roll

What Double Sided Tape Should I Use? Types, Strength and Uses Explained

The best double sided tape depends on three things: what you are sticking, how much load the joint carries, and whether it will live indoors or outside. For heavy or outdoor mounting, choose an acrylic foam tape. For paper, card and light displays, a thin tissue tape is usually right. For carpet and exhibition floors, use a cloth or polypropylene carpet tape, and for jobs that must seal out water, use butyl.

This guide from Oz Tape Store, an Australian online tape supplier, walks through every common type of double sided tape, what each one is good at, and how to get a bond that lasts.

What is double sided tape?

Double sided tape has adhesive on both faces, usually protected by a release liner on one side. It joins two surfaces without screws, rivets, glue or visible fixings. Most double sided tapes are built from three layers: an adhesive, a carrier in the middle (tissue, film, cloth or foam), and a second adhesive layer. Transfer tapes skip the carrier entirely and are pure adhesive on a liner.

The carrier is what gives each tape its personality. A foam carrier fills gaps and absorbs vibration. A tissue or film carrier keeps the bond thin and flat. A cloth carrier tears by hand and grips rough backings.

What types of double sided tape are there?

Here is a quick comparison of the main types and where each one fits.

Tape type Carrier Best for Example sizes we stock
Acrylic foam (very high bond) Acrylic foam Signs, trims, glass panels, replacing screws and rivets 0.5mm or 1mm thick, 6 to 48mm wide x 33m
PE foam mounting tape Closed cell polyethylene foam Mirrors, displays, general mounting, filling small gaps 1.1, 1.6 or 3.2mm thick, 9 to 48mm wide
Tissue tape Thin tissue Paper, card, printing, framing and craft 6 to 72mm wide x 50m
Polyester or PET film tape Polyester film Nameplates, membrane switches, trims, thin precise bonds 6 to 12mm wide x 33m
Cloth tape Woven cloth Carpet joins, exhibitions, fabric and signage 12 to 96mm wide x 25m
Carpet tape (polypropylene) Polypropylene Rugs, mats, vinyl and exhibition flooring 6 to 72mm wide x 25m
Butyl sealing tape Mouldable butyl Roofing, cladding laps, gutters, vapour barriers 24 to 96mm wide x 15m
Transfer tape None (adhesive only) Labels, gaskets, laminating thin parts, ATG guns 24, 48 or 300mm wide x 50m
Removable tape Film with one permanent and one removable side Point of sale, mailing inserts, temporary fixing 6 to 48mm wide x 50m

You can browse every option in our double sided tape range.

Which double sided tape is the strongest?

Acrylic foam tapes are the strongest double sided tapes for most jobs. They are often called very high bond tapes and are used in place of screws, rivets and welds on metal, glass, powder coat and painted panels. Because the foam spreads the load along the whole joint, the bond is strong and even, with no drilled holes or visible fasteners.

Our ultra high bond acrylic foam tapes come in clear, white, grey and dark grey. Clear suits glass and show surfaces, white and grey suit painted metal and composites, and the dark grey version is made for hard to stick surfaces such as powder coat and many plastics.

What is the best double sided tape for outdoor use?

For outdoor use, choose a tape with an acrylic adhesive, ideally an acrylic foam tape. Acrylic adhesives handle sun, rain and temperature swings far better than rubber adhesives, which can soften in heat and lose grip over time.

If the job also needs to keep water out, such as a roofing lap or gutter join, a double sided butyl sealing tape is the better pick. Butyl stays soft and flexible, so it seals and bonds in one step on metal, timber, membranes and concrete.

What double sided tape should I use for mounting signs, mirrors and displays?

Use a foam tape. The foam layer fills small gaps between uneven surfaces and cushions vibration, so the bond holds even when the wall or panel is not perfectly flat.

  • Light to medium items indoors: a white PE foam mounting tape is a reliable, cost effective choice.
  • Heavier items, metal or outdoor signs: step up to an acrylic foam tape.
  • Uneven or textured surfaces: choose a thicker foam, such as 3.2mm, to take up the gap.

See all of our double sided foam tapes, from thin 0.4mm acrylic to 3.2mm PE foam.

What double sided tape is best for paper, card and craft?

A thin tissue tape is best for paper, card and craft. It lies flat under the paper, tears easily by hand and grips straight away, so there is no bulge or shadow on the finished piece. Our high tack double sided tissue tape is a popular choice for printing, splicing, framing and card making.

For photos, artwork and archival framing, use an acid free tape so the adhesive will not yellow or damage the paper over time. If you apply a lot of tape, an ATG applicator gun with transfer tape lays a fast, clean line of adhesive and saves time on production work.

What double sided tape holds carpet and flooring?

Cloth and polypropylene carpet tapes are made for floors. They use an aggressive adhesive that grips the textured backing of carpet, mats and vinyl and stays down under foot traffic.

  • Exhibitions and events: a white double sided cloth tape tears by hand and conforms to rough surfaces.
  • Busy areas and stair treads: a heavy duty brown cloth tape has thicker adhesive for demanding jobs.
  • Rugs and mats at home: a polypropylene carpet tape keeps them flat and stops slipping.

How do I get the best bond with double sided tape?

Most tape failures come down to surface preparation and pressure, not the tape itself. Follow these steps for a bond that lasts:

  1. Clean both surfaces. Remove dust, oil and old adhesive. A surface prep cleaner or isopropyl alcohol works well on smooth surfaces.
  2. Make sure everything is dry. Moisture stops the adhesive from wetting out the surface.
  3. Apply at a comfortable room temperature. Cold surfaces make adhesives stiff and slow to grab.
  4. Press firmly along the whole length. Pressure, not time, is what makes a pressure sensitive adhesive bond. Use a roller on larger areas.
  5. Give it time before loading. Many tapes keep building strength for up to 24 hours, so wait before hanging heavy items.

How do I choose the right width and thickness?

As a rule, more contact area means more holding power. For mounting, run tape around the edges of the item and add strips across the middle on larger pieces. Choose a thicker foam when surfaces are uneven, and a thin film or tissue tape when you need a flush, low profile finish.

Every double sided tape at Oz Tape Store comes with bulk savings applied automatically in the cart: 5% off 2 or more items, 10% off 6 or more, and 15% off 10 or more.

Frequently asked questions

Can double sided tape replace screws?

Yes, in many cases. Acrylic foam very high bond tapes are used in place of screws, rivets and welds on metal, glass and painted panels, as long as the surfaces are clean and the tape has enough contact area.

Is double sided tape waterproof?

Foam, acrylic and butyl tapes resist water well once bonded. Butyl tape is the best choice when the job needs to seal out water as well as stick.

Will double sided tape damage painted walls?

Permanent tapes can lift paint when removed. For temporary fixing, use a removable double sided tape, which has one permanent side and one side that lifts away without residue.

What is the difference between tissue tape and transfer tape?

Tissue tape has a thin tissue carrier between two adhesive layers, which makes it easy to handle and tear. Transfer tape has no carrier at all, giving an even thinner bond that suits labels, gaskets and ATG applicator guns.

Where can I buy double sided tape in Australia?

Oz Tape Store, an Australian online tape supplier, stocks foam, acrylic, tissue, film, cloth, butyl, transfer and removable double sided tapes, with free shipping on orders of $150 or more.

Back to blog